Description
The new Peerless HDS tweeter builds on Peerless’ long history of tweeter design by optimising several key design elements for pure, clean music reproduction. The HDS tweeter uses a very light, low mass “soft dome” with high internal damping, and a highly optimised, low-compression magnet system, which was designed especially for the low mass dome. The result is a driver that has both good sensitivity and an impressive range into the lower frequencies. The low mass dome, coupled with a fully vented motor system provides non-compressed sound reproduction over the entire frequency response. This combination allows the HDS tweeter to be used in systems with lower cross-over points than is recommended for most normal tweeters, making this product a powerful tool for any acoustic designer in the process of tuning a system. The HDS tweeter is ideal for use in applications including home entertainment, studio monitors, and general hi-fi systems.
Product Specification Sheet (.pdf) 810921
| Code | 810921 |
| Description | PEERLESS 1″ DOME TWEETER – PREMIUM HDS |
| Vas | 0.02L |
| Le | 0.04mH |
| Mms | 0.18g |
| Qts | 0.29 |
| Cms | 0.29mm/N |
| Qms | 0.51 |
| Qes | 0.65 |
| QTY | 1 |
| Inch | 1 |
| Size | 1″ |
| Rms | 1.54kg/s |
| Zo | 10.82Ω |
| Width | 104mmØ |
| Coil | 26mmØ |
| Depth | 32.3mm |
| Re | 5.6Ω |
| Power (RMS) | 51-100 Watt |
| Fs | 700Hz |
| Sd | 7cm² |
| Impedance (Ohm) | 8 ohm |
| Prms | 80W |
| Power | 80Wrms |
| Zn | 8Ω |
| Impedance | 8Ω (Re 5.6Ω) |
| Sens. | 91.3dB |
| Price Type | each |
| Manufacturer | Peerless |
| Type | Tweeter |
| Price Type 1 | x1 |
Reviews
There are no reviews yet.